Back

FloppyDTV C/CI BDA FireWire incl. CI (HDTV)

FloppyDTV C/CI BDA FireWire incl. CI (HDTV)

1 Finger Drag
only 129,00 EUR
Shipping time:in stock in stock
Product No.: DIG-FlopCAB
For further information, please visit the homepage of this product.
VistaTV FULL Version: 

Details

Digital Cable ( DVB-C ) Receiver for multimedia computer 

Main Features

Support for  HDTV Channels

- DVB-C receiver (up to QAM256 )
- Software decoding of MPEG2 and MPEG4 / H.264
- Watch and record TV in the highest available quality
  Read the "System requirements" below!

Support for PayTV Channels

- Integrated Common Interface , watch and record Free To Air or PayTV channels
- Compatible with most popular CAMs
- Tested with several PayTV providers
  PayTV channels require a CAM and a valid smartcard (subscription)

Fully integrated in Windows Media Center      

- Easy to use in Windows Media Center    
- Driver for Windows Media Center in Vista64 are also available in the download section
  Windows Media Center doesn't support MPEG4/H.264 channels!!!

Integrated in most popular Media Center Software

- Fully integrated in many TV Software like DVBViewer ,  Mediaportal
- Driver for Vista 64 bit also available in the download section
  Now FloppyDTV C/CI also works with EyeTV 3 on Apple Computers !
 
Fits in almost any computer!

- FloppyDTV C/CI can be mounted on any PCI, PCI-Express, AGP or empty slot
- Need only a single PCI Slot
- Connection to the computer through FireWire (IEEE1394)
- Easy connect more than one FloppyDTV thanks to the integrated FireWire Repeater
- Special FireWire cable is provided to connect the FloppyDTV to the Motherboard
- Also suitable to be mounted on 3,5" Floppy Drive Bay (additional adapter available separately in the FloppyDTV Extension Kit)
  Download the Assembly Guide  to see how to use the FloppyDTV 

System requirements  

- FireWire (IEEE1394) port on board or with OHCI-adapter
- For PayTV: CAM-Module, valid subscription/smartcard
- For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder
- For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate
- For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder
- For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000
- For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP)  
  Recommended: Dual Core processor REQUIRED for WinMCE 2005 or Vista)
- For H.264 channels: H.264 software decoders

Front End features

- Antenna Connector Input: IEC-Type 75 Ohm
- Antenna Connector Output: IEC-Type 75 Ohm
- Input Frequency Range: 51-858MHz
- Supported Modulation: QAM4, QAM16, QAM64, QAM 128, QAM256

Included in the "FloppyDTV C/CI"  

- FloppyDTV C/CI, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard)
- Antenna Cable
- Additional PCI mask to let the FireWire cable go outside the PC Housing if required.
- Printed Assembly and Quick Install Guide
- Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate)
- FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable
- Vista 64Bit driver are available for download
  MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV C/CI package

Accessories (sold separately)

A " FloppyDTV Extension KIT " is also available and includes:
- 3,5" FloppyDTV Adapter
- Remote control
- MPEG2 / MPEG4 Software decoders (Main Concept)
- CD with Drivers and FireDTV Software

Downloads

Data sheet
67.88 KB
  Download
Manual
0 B
  Download
Manual
1.96 MB
  Download

Customer-tip

[Next>] | [last>>]
   12 Articles in this categorie
Back

About MobileST

MobileST: Smartphone Template/Modul für xt:Commerce

Copyright © 2011 Phodana media
Website: www.phodana.de
Version: 1.4.0

MobileST ist ein Template/Modul für xt:Commerce, das allen Shop-Besuchern ein komfortables Einkaufserlebnis bietet, die mit dem Smartphone den Online-Shop besuchen. Alle Seiten sind so optimiert, dass der Besucher schnell und einfach durch die einzelnen Shopseiten navigieren kann und sofort alle nötigen Informationen auf einem Blick hat. Die Navigation durch Links ist Touch-optimiert und die Darstellung so gewählt, dass nicht mehr in die Seite hereingezoomt werden muss.

Das Modul ermöglicht es mit dem Smartphone, einfach nach gewünschten Artikeln zu suchen, diese aufzurufen, und sich Produktangaben auf Artikel-Detailseiten anzuschauen. Dort findet der Besucher Produktbeschreibungen, ähnliche Angebote, die Option, den Artikel in den Warenkorb zu legen anschließend zu bestellen. Weiterhin kann das Kundenkonto verwaltet werden und getätigte Bestellungen eingesehen werden.

Unterstützte Smartphones sind: Geräte mit iOS, Android, BlackBerry, Windows Phone, Palm web OS und Symbian (eingeschränkt)

Credits

Back

Bestseller