SATELCO EasyWatch HDTV USB CI (DVB-S2) - EAN: 4260003670617

BASICS
• Pay- and Free-TV satellite receiver
• USB 2.0 interface for use with Personal Computer or notebooks
• Integrated Common Interface to insert various Conditional Access Modules for decrypting Pay-TV
• Video and Audio decoding via software decoder (MPEG-2 and MPEG-4 AVC/H.264)
• Installation Plug and Play
• Features reception and presentation of DVB® data services (high-speed multicast and internet access)
• Fully compliant to: DVB-S standard EN 302 307
• MPEG2 Transport Stream support: ISO/IEC 13818-1
• DVB-Video/-Audio support: ISO/IEC 13818-2,-3
• DVB-Data support: EN 301 192
GENERAL DATA
• Cabinet (WxHxD, cm) / Weight : approx. 100,5 x 30,0 x 155,5 approx. 0,3 kg
INPUT / OUTPUT SPECIFICATION
• Antenna input: IEC female
• USB 2.0 connector
• PSU connector
RF SPECIFICATION
• Frequency range: 950-2150 MHz
• QPSK demodulation accordingly to EN 302 307
• RF input level: -65 up to –25 dBm (IEC F-type female)
For DVB-S
• Input connector: IEC60169-2 female
• SCPC/MCPC support 2 Msymbols/s to 45 Msymbols/s
• QPSK with supported rates 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
• Viterbi soft decoder rate ½
• outer Reed-Solomon decoder as per DVB-S system
• Up to 60 Mbps channel bit rate For DVB-S2
• SCPC/MCPC support 10 Msymbols/s to 30 Msymbols/s
• QPSK and 8PSK with supported rates 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
• LDPC and BCH decoder as per DVB-S2 requirements
• Digital Nyquist root filter with 0.20, 0.25, 0.35 roll-off factors
• Up to 90 Mbps channel bit rate LNB CONTROL
• Band selection: 22 KHz
• Polarity selection: 14/18 V
• Tone burst mode
• DiSEqC 1.0
• LNB current support maximal 350 mA
SOFTWARE VIDEO DECODER
• MPEG profiles : MPEG-2 Video, MPEG-4 AVC/H.264
• High Definition and Standard Definition: 1080i50, 720p50, 576i25
• Picture Formats : Auto WSS 4:3, 16:9, 2.21:1 (Pal only)
SOFTWARE AUDIO DECODER
• Profiles : MPEG 2 layer I & II
• AC 3 Decoding : yes
incl. VistaTV
• Recording and Play back of TV/Radio programs
• Teletext decoding
• Time shift support
• BDA driver (BroadcastDriverArchitecture) supports many 3rd party applications
• Timer / sleep timer
• Favourite mode
• EPG (SI based)
• Short EPG (now/next)
• languages : D
• Automatic/manual channel search
• API : For third-party software developers an open API (application programming interface) is available
MINIMUM SYSTEM REQUIREMENTS*
• Windows XP 32- and 64bit, Windows Vista 32- and 64bit
• CPU for SDTV: at least 800 MHz
• CPU for HDTV: at least P4 3,4 GHz or a comparable AMD Athlon (Dual Core recommended)
• 512MB RAM (1024MB recommended)
• Hard disk with at least 1GB free storage space
• Graphics card with at least 64 MByte memory and DirectX 9 support or higher
• Sound card with DirectX 9 support or higher
• Free USB 2.0 port
• CD ROM drive
• Digital satellite dish
* for Windows XP; for Windows Vista greater PC performance is recommended
ACCESSORIES
• Power Supply 230VAC/50Hz to 12VDC/1.5A
• USB 2.0 cable
• Quick-Start Guide
• Remote Control inclusive Batteries
• CD-Rom inclusive driver and application software
STANDARDS AND REGULATIONS
• DVB-S standard EN 302 307
• MPEG2 Transport Stream support to ISO/IEC 13818-1
• DVB-Video/-Audio support to ISO/IEC 13818-2,-3
• Safety and EMC regulations: EN 60950, EN 60065, EN 55013 and EN 55020, EN 55022 and EN 55024

only
incl. 19 % Tax excl.Shipping costs

Google +1:
Print product data sheet:
Product No.:	SAT-USBCI
Salesrank in our shop:	# 69
EAN:	4260003670617
Vote this product:
product recommendation:	Recommend this product!
Shipping time:	until sold
Realtime stock info:	more than 100 available
Your order MUST NOT exceed:	122 pieces !!!
Weight:	1.60 kg